Create an Account  |  Sign in Upload Your Qapp
Monitor Access List Violations via IP Accounting

Compatible with  PE 6.2, EE 6.1

By NetBrain on Mar 31, 2016  |   |  237 Downloads  | 

Favorite
(0 Reviews)
Overview This Qapp works for me: 0 0

Technology Keywords: Top-Talker via IP Accounting

Description


Monitor Access List Violations via IP Accounting

The IP Accounting ACL identifies IP traffic that fails an IP access control list. Note that a sudden increase in traffic being blocked by an ACL can indicate a security breach in the network and identifying IP source addresses that violates IP access control lists can help track down attackers.

Requirement:
Configure the following command on the interface to monitor:
<ip accounting access-violations>

Output:
Displays in table with list sorted by number of packets (max->min).
Source<->Destination<->Packets<->Bytes<->ACL


Data Source

This app uses output from the following commands:
show ip accounting access-violations

Screenshot

Monitor Access List Violations via IP Accounting

Applied To

Cisco Router,Cisco IOS Switch

Write Your Review

Please sign in to write a review.

User Reviews

Users who downloaded this also downloaded:

By Atin Tandon Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  144  Downloads
Description
Collect STP blocked interfaces which belong to specified vlan and annotate the results in map.

Input: Any L2 Qmap.

Output: The spanning tree blocked port for specified vlan are highlighted.
By Atin Tandon Oct 14, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  131  Downloads
Description
Collect AAA configuration and highlight the results in map.
Input: Any Qmap
Output: AAA configuration are highlighted 
By Amruta Ghule Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  194  Downloads
Description
Highlight EIGRP Parameters

Collect the EIGRP parameters and annotate the results in map.

Input:

Any Qmap.

Output:

The input L3 map will be annotated with: K values conflict Hello/Hold timers conflict

Applies to:

Cisco Router Cisco IOS Switch Cisco IOS XR Cisco Nexus Switch
By Amruta Ghule Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  157  Downloads
Description
Monitor EIGRP Adjacencies

Collect the EIGRP adjacencies counts and show the results in map.

Input:

Any Qmap.

Output:

The following parameters will be monitored: EIGRP neighbor count per device on device level EIGRP neighbor count per interface of a device on interface level

Applies to: Cisco Router Cisco IOS Switch Cisco IOS XR Cisco Nexus Switch
By Atin Tandon Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  150  Downloads
Description
Map Lan of Switch Create a L2 map for the subnet where the specified IP belongs to.

Input: Specify an IP address (e.g. 192.168.10.1 or 10.10.10.0/24).

Output: A L2 map with all network devices residing in the same LAN segment (subnet) as the specified IP, including end system using the IP, switches, routers, and firewalls.
By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  503  Downloads
Description
QoS Minute-by-Minute Analysis

Collect the QoS processes CPU and memory usage and show the results in map.

Input:
Any Qmap

Output:
Monitor items on device level:
QoS processes CPU usage
QoS processes memory usage
By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  433  Downloads
Description
Monitor Top-Talker via NetFlow

Description:
NetFlow provides statistics to support network and security monitoring, network planning, traffic analysis, and IP accounting. The NetFlow - Top N Talkers Support feature facilitates real-time traffic analysis by the use of show commands.

Requirement:
Configure the following commands to configure the NetFlow Top Talkers feature on the router:


ip flow-top-talkers
top 50
sort-by packets


Output:
Displays in table with list of protocols and total flow. The list is sorted by total flows (maxàmin).
By Atin Tandon Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  388  Downloads
Description
Collect the MAC information and export the results to csv file.

Input: Any Qmap or Device

Output: Export a CSV about MAC address information 
By Atin Tandon Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  377  Downloads
Description
Collect the interface transceiver information and export the results to csv file.

Input: Any device.

Output: Export a CSV file about interface transceiver information. 
By Nicky Liu Jan 12, 2017
Compatible with  PE 6.2, EE 6.2
0  Reviews  |  222  Downloads
Description
Input: Any Qmap

Output: The input L3 map will be annotated and highlight with: Line configuration SSH access Exec-timeout 
By Nicky Liu Oct 11, 2016
Compatible with  PE 6.2, EE 6.2
0  Reviews  |  273  Downloads
Description
Port Status Report Create a CSV file with current port status and last change time.

Input: Specify devices, and has SNMP accessiable.

Output: A CSV file with device name, interface name, last change time, mtu information.

Applies to: All standard MIB-2 Vendor
By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  306  Downloads
Description

Monitor BGP Neighbor Status

Use this App to test the neighbor relationship and neighbor statuses between BGP Peers. The app looks at BGP neighbor up/down status and annotates each device in the map with the number of BGP routes included in the routing tables.

Device Level Check:


BGP Neighbors(Up/Down)
BGP Routes
BGP Logging

By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  248  Downloads
Description
Check Reachability from As to Bs

Use this App to verify network reachability (e.g. to validate a network change) to/from multiple devices automatically. This app takes a table of endpoints as input. Run the app to test connectivity (via ping) from every device in the left column to each device in the right column.

Input:

          A table with 2 columns:


Column A: must be hostname
Column B: can be ostname, domain name or IP address


Output:

A report with Ping results.
By Amruta Ghule Oct 14, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  109  Downloads
Description
Monitor IS-IS Routes

Collect the IS-IS route count and show the results in map.

Input: Any Qmap

Output: Monitor items on device level: IS-IS route count

Applies to: Cisco Router Cisco IOS Switch Cisco IOS XR Cisco Nexus Switch Juniper Router Juniper EX Switch Juniper SRX Firewall
By Nicky Liu Oct 28, 2016
Compatible with  PE 6.2, EE 6.2
0  Reviews  |  140  Downloads
Description
Annotate PE Device Highlight PE device and annotate VRF information.

Input: Any Qmap.

Output: Device note with vrf list, and highlight PE device.
By Atin Tandon Oct 14, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  151  Downloads
Description
Collect the interface protocol information and export the results to csv file.

Input: Any Qmap

Output: Export a CSV about interface protocol information 
By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  331  Downloads
Description
Monitor Switching Changes

Monitors the topology changes and MAC addresses

Device Level:


Avaliable MAC
Topology change times


Interface Level:


Packets in/out error
Interface role and status in input VLAN
interface status of error disable


*Required Input Parameters:


VLAN ID

By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  478  Downloads
Description
Monitor VoIP_Video Stream

Monitor the interface status, class drops increment, PQ drops increment and display these items on the live map according to the selected "class-name". 

Input:
Any Qmap

Output:
Displays interface up/down, class drops increment, and PQ drops increment on the map.
By NetBrain Mar 31, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  452  Downloads
Description
Monitor Mulitcast Distribution Tree

Use this App to analyze configuration and performance of multicasting, including PIM neighbor count, receiver count, packets forwarded/received, and more.

Device Level:


PIM neighbor count
Receiver count
Rate (including pps and kbps)
Packets forwarded/received
RPF failed packet count


Interface Level:


Packets in/out
PIM neighbor count
IGMP joins and leaves count


*Required Input Parameters:


Multicast source address
Multicast group address

By Amruta Ghule Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  107  Downloads
Description
Monitor EIGRP CPU and Memory Usage

Collect the EIGRP CPU and memory usage and show it in map..

Input:

Any Qmap.

Output:

The following parameter will be monitored: EIGRP CPU usage EUGRP memory usage

 Applies to: Cisco Router Cisco IOS Switch Cisco IOS XR Cisco Nexus Switch
By Atin Tandon Oct 14, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  105  Downloads
Description
Highlight QoS VLAN For a specified QoS device, highlight QoS vlan in map.

Input: Any Qmap

Output: Divide the vlan according to QoS VLAN.
By Amruta Ghule Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  187  Downloads
Description
Highlight BGP Running Status

Collect the BGP running status and annotate the results in map.

Input: Any Qmap

Output: The input L3 map will be annotated with BGP AS number BGP neighbor counts BGP routes BGP received routes BGP advertised routes BGP CPU/MEM usage Highlight BGP neighbors

 
By Amruta Ghule Sep 02, 2016
Compatible with  PE 6.2, EE 6.1
0  Reviews  |  177  Downloads
Description
Map EIGRP AS

Map EIGRP devices by specified AS and highlight EIGRP neighbor relationship.

Input:

Specify device list, and AS of the EIGRP instances.

Output:

A L3 map with devices running EIGRP, and highlighted by selected AS ID.

Applies to: Cisco Router Cisco IOS Switch Cisco IOS XR Cisco Nexus Switch